AlSi10MnMg aluminum die casting alloy specification
high strength and toughness aluminum alloy
1. Product Basic Information
Product: AlSi10MnMg Aluminum Alloy Standard: BS EN-1676-2010 Color: Silver-gray Shape: Rectangular bar
2. Chemical Composition
| Element | Si | Fe | Cu | Mn | Mg | Zn | Pb | Ti | Al |
|---|---|---|---|---|---|---|---|---|---|
| Content | 9.0-11.5 | ≤0.2 | ≤0.03 | 0.4-0.8 | 0.15-0.6 | ≤0.07 | ≤0.1 | ≤0.15 | Balance |
Note: Compliant with RoHS, REACH environmental regulations.
3. Physical Properties (Refer to EN1706-2010)
| Alloy | Density (g/cm³) | Thermal Conductivity (W/m.k) | Solidus and Liquidus Temperature (°C) | Linear Expansion Coefficient (1/°C) | Electrical Conductivity (IACS%) |
|---|---|---|---|---|---|
| AlSi10MnMg | 2.63 | 140-170 | 575-587 | 21 | 19-25 |
4. Mechanical Properties of Castings (Refer to EN1706-2010)
| Alloy | Casting Method | Condition | Tensile Strength (MPa) | Yield Strength (MPa) | Hardness (HB) | Elongation (%) |
|---|---|---|---|---|---|---|
| AlSi10MnMg | Y | T5 | 270 | 150 | 80 | 4 |
| F | 250 | 120 | 65 | 5 |
5. Usage Instructions
Preheat and dry the alloy ingot before remelting. The melting temperature is determined by the size, wall thickness, and other external factors of the casting, usually between 670-720°C.
6. Advantages
This alloy belongs to the Al-Si-Mn-Mg quaternary eutectic alloy, with good fluidity, heat crack resistance, and is suitable for die casting. The alloy castings have high room temperature strength and excellent impact resistance, and can also be strengthened by heat treatment. It is not suitable for anodizing.
7. Applications
Widely used for castings with complex structures that require high impact strength: widely used in automotive structural parts, such as sub-frames, shock absorbers, and fasteners, as well as communication outdoor equipment brackets, shell bearing parts.
If you have any specific questions or require further adjustments, please feel free to ask.
Would you like me to translate any specific sections or terms?
Alisi10mnmg is an aluminum alloy brand of European Union, also known as en ac-43500, originated from Germany Silafont-36 of Ryan aluminum. The Si content of the alloy is slightly lower than that of AISI eutectic alloy,It has good liquidity. When the content of Fe is less than 0.15%, the plate shape of alfesi phase can be eliminated, and the microstructure of alfesi phase can be improved.There is no crack in die casting under stress. A certain Mn content can also prevent die sticking of the alloy during die casting. the microstructure is spherical. Therefore, the aluminum alloy is a kind of high strength and toughness aluminum alloy.High-pressure die cast (HPDC) aluminum components are increasingly integrated into the assembly of vehicles , telecom equipment and other industries that need high-Quality structural parts
| Nickname |
AlSi10MnMg
|
| Abbreviation of ADC |
Aluminum die castings(HPDC) |
| Die casting Aluminum Alloy-equivalents |
ac-43500 |
| Process |
Cold Chamber Die Casting |
| Melting Point |
670 °C ±50 ℃ |
| Density of ADC12(A383) |
2.75g/cm^3 |
| yield strength |
133.4mpa |
| tensile strength |
304.0mpa
|
| elongation |
12.12%
|
Are the AlSi10MnMg aluminum alloy die casting materiel right for you ?
Die casting AISi10MgMn alloy, which possess good casting ability, belongs to Al-Si-Mg- Mn.this kind of aluminum allly could be applied more and more broadly to load structure parts or safety parts with thin walls or complex geometry. But the price is very high than normal material adc12,a380,etc
Choosing the Right Material for Your aluminium die casting Parts
Download aluminium die casting alloy PDF to choose the right aluminum die casting material for your part according to Die Casting Material properties. Don’t see the AISi10MgMn that best choice for your design? Try other die casting metals ? learn more information of Normal material ADC12(A383) aluminum alloy specification,ADC alloy (chemical composition and mechanical properties etc).here are few tips for selecting the most suitable aluminum die casting meterial for your design.
| Alloy Name | Benefits |
| AlSi10MnMg |
high strength and toughmess aluminum,excellent |
| Anodizing die cating aluminum |
exterior part with high quality anodized surface treatment |
| LM6/ADC1/A360 |
high corrosion resistance and strength with little element”CU” but more difficult to cast |
| AC44300 | Excellent thermal conductivity casting material |
| ADC12(A383) |
Alloy ADC12 (A383) offers improved resistance to hot cracking (strength at elevated temperatures) and die filling characteristics. The aluminum properteis is very excellent.It has ease of casting , good mechanical properties, and dimensional stability ,better corrosion resistance. the performance – to – price ratio is very high. |
Case Studies of aluminium alloy AlSi10MnMg Die Casting Parts
[vc_row][vc_column][porto_products columns=”6″ column_width=”6″ ids=”2199, 2316, 2297, 2319, 2329, 2323″][/vc_column][/vc_row]
Applications of aluminium alloy die casting
Some of the uses of this alloy include electronic and Telecome equipment, automotive components, engine brackets, transmission and gear cases, appliances, lawn mower housings, furniture components, hand and power tools, Electric-car , Automobiles, Motorcycles,LED light,Electronics,Communications,die cast,Led Display Cabinet diecast, Home appliance, ,Aerospace, Carpentry, Defense, Bicycles, Digital technology, Carpentry, Pneumatic tools, Valves, Agricultural machinery.
DIE CASTING ALUMINUM Chemical Composition
Alloy AlSi10MnMg ,Adc12(A383),ADC1,ADC10,Zl102,A360,A380,etc
you aslo can download more die-casting-alloy composition
For more information about Die Casting Copmany China or discuss your next pressure die casting project. please Contact us at info@gdszsyx.com | skype / whatsapp/wechat /phone 86-18676679161